FBN82-01
BG Screwless Flat plate, Black Nickel, Double Dimmer Switch, 2 Way, Trailing Edge 200W
200W Rated (100W LED)
Easy to install supplied with fixing screws and installation instructions
Adjust your light level for mood setting as well as energy saving with 2 way on/off
Trailing (lagging) edge dimmer suitable for dimming LED, dimmable CFL's and traditional lighting
Intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload
Suitable for use with good quality electronic or wire wound transformers. Can also be used with good quality mains voltage halogen lamps incorporating GU10 bases
2 way switching allows for a second switch position in a circuit
Screwless front plate clips on and off easily and has a sleek flat profile
Moisture control gasket prevents tarnishing from new plaster
Certified to BS EN 60669-2-1
| General Colour | Black Nickel |
| Captive Terminal Screws | Yes |
| Backed-out Terminal Screws | Yes |
| Minimum Box Depth (mm) | 25 |
| Terminal Capacity (mm²) | 2 x 1.5mm² |
| Anti-fingerprint Lacquer | No |
| Anti-microbial Property | No |
| Fixing Screws Supplied | Yes |
| Terminal Arrangement | In Line Terminals |
| Number of Switches | 2 |
| Screw Caps | No |
| Switch Style Type | Push |
| Switch Type (Ways & Poles) | Two Way |
| Fixing Centres (mm) | W-60.3 |
| Operating Voltage (V) | 220-240 |
| Warranty (years) | 25 |
